1、 Product Setup
Before you can use your Wi-Fi Power Point Controller, it must be set up using your Android/iOS device. Initial setup must be performed using your home Wi-Fi network. Once it has been set up you can control your power outlet via Wi-Fi/3G/4G.
Important: A current mobile service plan is required for correct operation over 3G & 4G. Mobile data may be required for some features. The supplier is not responsible for any charges incurred. Please contact your network service provider for further information about your current data plan and any associated charges.
Note: Consult your device’s instruction manual if you are unsure how to download apps, connect to Wi-Fi or any other functions of your Android or iOS device.
2、 Software
The free SmartPoint App is available for Android and iPhone, and is required to operate your Wi-Fi Power Point Controller.
1. Ensure your iOS / Android device is connected to the internet using your home Wi-Fi network.
2. Open the App store on your phone.
3. Search for “SmartPoint” in the App store.
4. Download the SmartPoint controller App to your phone.
3、 Connecting the Wi-Fi Power Point Controller to your Wi-Fi network
Initial setup must be performed using your home Wi-Fi network.
1. Ensure your iOS / Android device is connected to your home Wi-Fi network. Refer to your device manual for further details on connecting your device to Wi-Fi.
2. Open the SmartPoint controller App on your iOS / Android device.
3. Click the settings icon at the bottom of the screen, then select SmartSetup.
4. Your wireless network name (SSID) is shown in the smart setup screen below is an empty field to enter your Wi-Fi network password. Enter your password into this box.
5. Insert the Wi-Fi Power Point Controller into the power socket. Turn on the power outlet. The Power Point Controller will begin to flash red rapidly to indicate it has enter pairing mode.
6. While the light is flashing rapidly, select the Setup New Socket button in the SmartPoint App to begin the pairing process.
7. Once paired, you will see a ‘Config successful’ message. If you do not see this message repeat step 7 or refer to the FAQ at the back of the manual for more information.
Note: The configuration process should take about 1 minute.
8. Once configuration is complete, press Back, then press Devices. Press the on-screen power button to check that your Wi-Fi Power Point Controller is now operating.
9. Connect the appliance you wish to control to the socket of the Wi-Fi Power Point Controller.
4、 Customise your Wi-Fi Power Point Controller
The Wi-Fi Power Point Controller can be customised to allow you to easily tell the difference between multiple controllers connected to your network.
1. Open the SmartPoint App, and select Customise from the main screen.
2. Select the Wi-Fi Power Point Controller you wish to modify, and you will see the current name and current graphic icon displayed.
3. To change the name of the Wi-Fi Power Point Controller, click the name field, and modify the text. When you have finished, press done.
4. Select the graphic you wish to be displayed for this Wi-Fi Power Point Controller by clicking on the icons.
5. Press Confirm to save your changes, and return to the Customise menu.
5、 Locking your Wi-Fi Power Point
You can lock the Wi-Fi Power Point to prevent new users from discovering the Power Point over your local network.
1. Open the SmartPoint App, and select Customise from the main screen.
2. Select the Wi-Fi Power Point Controller you wish to modify, and you will see the current name and current graphic icon displayed.
3. Press the lock icon to lock the Wi-Fi Power Point controller from being discovered by new users.
6、 Changing your password
Once you have set up your WiFi Power Point Controller, you can add a password to prevent other users accessing the device remotely.
1. Open the SmartPoint App, and select Customise from the main screen.
2. Select the Wi-Fi Power Point Controller you wish to modify, and you will see the current name and current graphic icon displayed.
3. Select Modify Remote Password to set a password for the Wi-Fi Power Point Controller.
4. Enter the old password, and your new password, then press OK.
Note: The default password is 888888.
5. Press Confirm to save your changes, and return to the Customise menu.
7、 Switching On and Off
To control your Wi-Fi Power Point Controller simply follow the below instructions.
1. Open the SmartPoint App, and select Devices from the main screen.
2. Select the device you wish to control, then press the power button to toggle between on and off state.
8、 Timers and Schedules
Your Wi-Fi Power Point Controller can be used to manage your device power using automatic timers and schedules.
Setting the Automatic Timer
1. Connect your iOS Android device to the Wi-Fi network.
2. Open the SmartPoint App, and select Rules from the main screen.
3. Select Timing from the menu at the top of the screen, then select the rule you wish to modify or create a new rule by pressing Add.
4. Repeat – Select the days you wish your rule to activate. For a single time only rule, you should select single from the list.
5. Time – Select the time you wish the action to be performed.
6. Devices – Select the on/off status you wish for each of your connected Wi-Fi Power Point Controllers at this time.
7. Once you have finished making changes, click Save to return to the Rules menu.
Tip: To return to the Rules menu without saving the timer, select Back.
9、 Using the Countdown Timer
1. Connect your mobile to a Wi-Fi or 3G/4G network.
2. Open the SmartPoint App, and select Rules from the main screen.
3. Select Countdown from the menu at the top of the screen, then select the Wi-Fi Power Point Controller you wish to control.
4. You have the option to select a preset time period (A), or create your own time period (B) using the hour : min : sec selector.
5. Choose if you would like the Wi-Fi Power Point Controller to be in on status at the end of the countdown, select “ON”. Select “OFF” if you wish the Wi-Fi Power Point Controller to be in off status at the end of the countdown.
Note: The timer can support 1 countdown task and 10 timers
6. Set the triggering condition:
a. After creation – The countdown timer begins as soon as you press save, and will operate once only.
b. Once opened – The countdown timer begins every time the Wi-Fi Power Point Controller is operated. For example, if you switch on, the countdown timer will switch off after the time period has passed, i.e. setting a maximum on time for the Wi-Fi Power Point Controller.
7. Once you are finished making changes, select Save to return to the Rules menu.
Tip: To exit the countdown timer menu without saving your changes, press Back.
10、 Controlling your Wi-Fi Power Point Controller from a Second iOS /Android Device
Once you have set up a Wi-Fi Power Point Controller a second iOS or Android device can discover it over your home Wi-Fi network and also control it remotely.
1. Ensure your iOS / Android device is connected to your home Wi-Fi network.
2. Open the SmartPoint controller App on your iOS / Android device.
3. Click the Settings icon at the bottom of the screen, then select Smart Setup.
4. Your wireless network name (SSID) is shown in the smart setup screen below is an empty field to enter your Wi-Fi network password. Enter your password into this box, then press Done.
5. Select the Search socket button on your iOS / Android device.
The App will begin to search for the Wi-Fi Power Point Controllers currently connected to your home Wi-Fi network.
6. Once searching is complete, press Back, then click Devices. You should now see all the Wi-Fi Power Point Controllers connected to your Wi-Fi network.
Note: If you have set the Wi-Fi Power Point Controller to locked mode it will not be discoverable by other devices.
11、 Deleting a Device from the SmartPoint App
1. Open the SmartPoint controller App on your iOS / Android device.
2. Click the Customise icon at the bottom of the screen, then select the Wi-Fi Power Point Controller you wish to delete.
3. Select Delete from the top right corner of the screen. Press OK to confirm you wish to delete the Wi-Fi Power Point Controller.
4. You will be returned to the Customise screen, when you can select another Wi-Fi Power Point Controller if you wish.
12、 Troubleshooting Guide
If you are having trouble connecting to your router try the following:
1. Check other devices are able to connect to your router. If not, try resetting your router.
2. The network may have disconnected during the configuration process. Try to configure again.
3. You may have made an error entering in the password. Please try again, remember this is case sensitive.
4. Check the security configuration mode of your router, WPA/WPA2 is recommended.
5. You may have a limited number of connections to your router. Try closing some connections and to configure again.
13、 Port Forwarding
You may require the below information to successfully port forward:
- The IP address your router has allocated the Wi-Fi Power Point Controller on your network.
- The port that the Wi-Fi Power Point Controller will be accessing. The Wi-Fi Power Point Controller uses port 1000.
- The MAC address of the Wi-Fi Power Point Controller. This can be found on the rear of the Wi-Fi Power Point Controller.
As every router is different, please refer to your router/modem instruction manual for detailed information or contact the manufacturer regarding port forwarding. You should still be able to use the Wi-Fi Power Point Controller within your home Wi-Fi network without port forwarding.
14、 Cannot connect to Router using Smart Setup
1. Insert the Wi-Fi Power Point to a power outlet. Switch the power outlet on.
2. Press and hold the button on the front of the unit until it begins flashing blue rapidly. The Wi-Fi Power Point has now entered AP mode.
3. Enter the Smart Point app and select Smart Setup. Choose AP from the Smart Setup Menu.
4. The app will begin scanning nearby Wi-Fi networks. Once the scan is complete it will read”Connected to SMART-POINT”.
5. Select “Choose” to connect to your Home Wireless Network. Select your network and press “Yes” to confirm.
6. Enter your password into the password field and press Yes to connect.
7. Once the Wi-Fi Power Point has paired with your router the LED indicator will turn solid red.